with care! Incorrect insertion of adapter in programmer's ZIF socket or
device in adapter's ZIF socket may lead to programmed device damage.
adapter into programmer's ZIF socket. If you are in doubts about
orientation of the adapter in programmer's ZIF socket, there is a rule
of thumb - orientation of adapter's name text is the same as
orientation of the text on the top of programmer.
check the placement of adapter in programmer's ZIF socket.
the cover of adapter's ZIF socket (the topmost movable part) to open
the socket. Insert the device into adapter's ZIF socket. Correct
position of programmed device in adapter's ZIF socket is indicated by
picture near (usually on left above) the adapter's ZIF socket. On that
picture, reference corner of device (e.g. position of pin 1) is
indicated by dot, by number 1, by bevelled corner or by any combination
of mentioned. Then release adapter's ZIF socket.
cover must be fully actuated (depressed) before inserting a device into
the socket. If device is inserted into only partially opened ZIF
socket, then - after releasing of cover – device pins might
not press on device while inserting it and/or releasing the cover.
check the placement of programmed device in adapter's ZIF socket. If
everything looks OK, the device is ready for programming.
take out the device from adapter, push the cover of adapter's ZIF
socket and remove the device.
you finish the work with adapter, remove it from programmer's ZIF