adapter to the device programmer ZIF socket according to the picture
placed near of it. If you have some doubts about orientation of this
adapter in device programmer ZIF socket, it is valid general rule, the
orientation of the text of title is the same as the text on the top of
the device programmer.
the top of adapter ZIF socket to open it. Insert the device into the
adapter ZIF socket. The right position of the programmed device in
adapter ZIF socket is show at picture near (mainly left above) the
adapter ZIF socket. Then release adapter ZIF socket.
Pin No. 1 of device is oriented to the bottom side of adapter.
a lid (the upper - moving - part of ZIF) of programming adapter a bit
up to gain more reliable contact
check interconnection between device and adapter ZIF socket. If
everything looks OK, the device is ready for programming.
careful, because the incorrect insertion of adapter to the device
programmer ZIF socket or device to the adapter ZIF socket can damage
the programmed device.
take out the device push the top of adapter ZIF socket and remove
device from it.
you finish work with adapter, remove it from the device programmer ZIF
not directly touch the pins of the adapter and adapter ZIF socket,
because dirt may cause errors during programming of device.
handling with the device we recommended to use a vacuum pick up tool.
conditions: operating temperature 5°C ÷ 40°C
(41°F ÷ 104°F), operating humidity 20%..80%,