Macsym Tecnologia Eletrônica

Conversor DIL40/TSOP40 ZIF-CS 12.4mm

Conversor DIL40/TSOP40 ZIF-CS 12.4mm Ampliar

Conversor DIL40/TSOP40 ZIF-CS 12.4mm

  • Marca: ELNEC
  • Código: 9CE700072
  • Preço: Sob consulta
  • Peso: 0,000

Conversor DIL40/TSOP40 ZIF-CS 12.4mm

* Conversor de encapsulamento para memórias TSOP40.
* Converte TSOP40 para DIL40.
* Contatos banhados a ouro.
* Suporta 10.000 inserções.
* Soquete Zero Force.
* Modelo ClamShell. Ref.: 70-0072

Adapter manual
  • Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  • Open the adapter ClamShell ZIF socket. Insert the device into it (place device on contacts). The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. If you use thisadapter for devices with less than 40 pins, then place device to the bottom edge of adapter ClamShell ZIF socket. Upper contacts stay unconnected.
  • Visually check interconnection between device and adapter ClamShell ZIF socket. If everything looks OK, close it and now, device is ready for programming.
  • Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ClamShell ZIF socket can damage the programmed device.
  • To take out the device, open adapter ClamShell ZIF socket and remove device from it.
  • When you finish work with adapter, remove it from the device programmer ZIF socket.
  • Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  • For handling with the device we recommended to use a vacuum pick up tool.
  • If programming yields isn't 100% when using programming adapter or if some unreliability appears, try to connect one 22nF-100nF multilayer capacitor (that meet the EIA X7R or Z5U specification) between leads of adapter connected to pins VCC and GND pins of programmed chip.

Accepted package(s)



0072

Mais fotos

Foto ilustrativa

Conversor DIL40/TSOP40 ZIF-CS 12.4mm

Downloads:

  • Não há nenhum download associado a esse produto.

Conversor DIL40/TSOP40 ZIF-CS 12.4mm

Vídeo do Produto:

Não há Vídeo para este produto.

« VoltarProdutos Relacionados

Atendimento

Telefone de Atendimento
Telefone de Atendimento
macsym@macsym.com.br
Minhas compras (0) »

Busca

Formas de Pagamento
Formas de Entrega
Brasil / Português
2nd © Macsym Tecnologia - Rua Egidio Coni, 5 - Penha - São Paulo - SP - 03654-130 - Brasil