Macsym Tecnologia Eletrônica

Conversor DIL28/QFP32 ZIF AVR-1

Conversor DIL28/QFP32 ZIF AVR-1 Ampliar

Conversor DIL28/QFP32 ZIF AVR-1

  • Marca: ELNEC
  • Código: 9CE700687
  • Preço: Sob consulta
  • Peso: 0,000

Conversor DIL28/QFP32 ZIF AVR-1

* Adaptador especial, designado para a família Atmel AVR em encapsulamento QFP32.
* Suporta 10.000 inserções.

Ref: 70-0687

Wiring is:
QFP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
DIL 5 6 J5 7 8 J4 9 10 11 12 13 14 15 16 17 18
QFP 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
DIL 19 20 NC 21 22 NC 23 24 25 26 27 28 1 2 3 4
Adapter manual
  • Insert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket, it is valid general rule, the orientation of the text of title is the same as the text on the top of the device programmer.
  • Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. On this picture reference corner (e.g. position of pin 1) of device is indicated by dot, by number 1, by bevelled corner or by any combination of them. Then release adapter ZIF socket.
  • Visually check interconnection between device and adapter ZIF socket. If everything looks OK, the device is ready for programming.
  • Be careful, because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.
  • To take out the device push the top of adapter ZIF socket and remove device from it.
  • When you finish work with adapter, remove it from the device programmer ZIF socket.
  • Do not directly touch the pins of the adapter and adapter ZIF socket, because dirt may cause errors during programming of device.
  • For handling with the device we recommended to use a vacuum pick up tool.
  • Connection table:
  • J4 – pin 6 connect through jumper to pin 4 of QFP32
  • J5 – pin 3 connect through jumper to pin 5 of QFP32
  • NC - not connected 
Accepted package(s)

0687

Mais fotos

Foto ilustrativa

Conversor DIL28/QFP32 ZIF AVR-1

Downloads:

  • Não há nenhum download associado a esse produto.

Conversor DIL28/QFP32 ZIF AVR-1

Vídeo do Produto:

Não há Vídeo para este produto.

« VoltarProdutos Relacionados

Atendimento

Telefone de Atendimento
Telefone de Atendimento
macsym@macsym.com.br
Minhas compras (0) »

Busca

Formas de Pagamento
Formas de Entrega
Brasil / Português
2nd © Macsym Tecnologia - Rua Egidio Coni, 5 - Penha - São Paulo - SP - 03654-130 - Brasil